HashiConf 2024 Now streaming live from Boston! Attend for free
Vault
Vault Home

Login MFA

Vault supports Multi-factor Authentication (MFA) for authenticating to an auth method using different authentication types. We use the term Login MFA to distinguish this feature and the Vault Enterprise MFA. Login MFA is built on top of the Identity system of Vault.

MFA types

MFA in Vault includes the following login types:

NOTE: The Token auth method cannot be configured with Vault's built-in Login MFA feature.

  • Time-based One-time Password (TOTP) - If configured and enabled on a login path, this would require a TOTP passcode along with a Vault token to be presented while invoking the API login request. The passcode will be validated against the TOTP key present in the caller's identify in Vault.

  • Okta - If Okta push is configured and enabled on a login path, then the enrolled device of the user will receive a push notification to either approve or deny access to the API. The Okta username will be derived from the caller identity's alias.

  • Duo - If Duo push is configured and enabled on a login path, then the enrolled device of the user will receive a push notification to either approve or deny access to the API. The Duo username will be derived from the caller identity's alias. Note that Duo could also be configured to use passcodes for authentication.

  • PingID - If PingID push is configured and enabled on a login path, the enrolled device of the user will receive a push notification to either approve or deny access to the API. The PingID username will be derived from the caller identity's alias.

Login MFA procedure

NOTE: Vault's built-in Login MFA feature does not protect against brute forcing of TOTP passcodes by default. We recommend that per-client rate limits are applied to the relevant login and/or mfa paths (e.g. /sys/mfa/validate). External MFA methods (Duo, Ping and Okta) may already provide configurable rate limiting. Rate limiting of Login MFA paths are enforced by default in Vault 1.10.1 and above.

Login MFA can be configured to secure further authenticating to an auth method. To enable login MFA, an MFA method needs to be configured. Please see Login MFA API for details on how to configure an MFA method. Once an MFA method is configured, an operator can configure an MFA enforcement using the returned unique MFA method ID. Please see Login MFA Enforcement API for details on how to configure an MFA enforcement config. MFA could be enforced for an entity, a group of entities, a specific auth method accessor, or an auth method type. A login request that matches any MFA enforcement restrictions is subject to further MFA validation, such as a one-time passcode, before being authenticated.

There are two ways to validate a login request that is subject to MFA validation.

Single-Phase login

In the Single-phase login, the required MFA information is embedded in a login request using the X-Vault-MFA header. In this case, the MFA validation is done as a part of the login request.

MFA credentials are retrieved from the X-Vault-MFA HTTP header. Before Vault 1.13.0, the format of the header is mfa_method_id[:passcode] for TOTP, Okta, and PingID. However, for Duo, it is mfa_method_id[:passcode=<passcode>]. The item in the [] is optional. From Vault 1.13.0, the format is consistent for all supported MFA methods, and one can use either of the above two formats. If there are multiple MFA methods that need to be validated, a user can pass in multiple X-Vault-MFA HTTP headers.

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --header "X-Vault-MFA: d16fd3c2-50de-0b9b-eed3-0301dadeca10:695452" \
    http://127.0.0.1:8200/v1/auth/userpass/login/alice

If an MFA method does not require a passcode, the login request MFA header only contains the method ID.

 $ curl \
     --header "X-Vault-Token: ..." \
     --header "X-Vault-MFA: d16fd3c2-50de-0b9b-eed3-0301dadeca10" \
     http://127.0.0.1:8200/v1/auth/userpass/login/alice

Starting in Vault 1.13.0, an operator can configure a name for an MFA method. This name should be unique in the namespace in which the MFA method is configured. The MFA method name can be used in the MFA header.

$ curl \
    --header "X-Vault-Token: ..." \
    --header "X-Vault-MFA: sample_mfa_method_name:695452" \
    http://127.0.0.1:8200/v1/auth/userpass/login/alice

In cases where the MFA method is configured in a specific namespace, the MFA method name should be prefixed with the namespace path. Below shows an example where an MFA method is configured in ns1.

$ curl \
    --header "X-Vault-Token: ..." \
    --header "X-Vault-MFA: ns1/sample_mfa_method_name:695452" \
    http://127.0.0.1:8200/v1/auth/userpass/login/alice

Two-Phase login

The more conventional and prevalent MFA method is a two-request mechanism, also referred to as Two-phase Login MFA. In Two-phase login, the X-Vault-MFA header is not provided in the request. In this case, after sending a regular login request, the user receives an auth response in which MFA requirements are included. MFA requirements contain an MFA request ID which identifies the login request that needs validation. In addition, MFA requirements contain MFA constraints that determine which MFA types should be used to validate the request, the corresponding method IDs, and a boolean value showing whether the MFA method uses passcodes or not. MFA constraints form a nested map in MFA Requirement and represent all MFA enforcements that match a login request. While the example below is for the userpass login, note that this can affect the login response on any auth mount protected by MFA validation.

Sample Two-Phase login response

{
  "request_id": "1044c151-13ea-1cf5-f6ed-000c42efd477",
  "lease_id": "",
  "lease_duration": 0,
  "renewable": false,
  "data": null,
  "warnings": [
    "A login request was issued that is subject to MFA validation. Please make sure to validate the login by sending another request to mfa/validate endpoint."
  ],
  "auth": {
    "client_token": "",
    "accessor": "",
    "policies": null,
    "token_policies": null,
    "identity_policies": null,
    "metadata": null,
    "orphan": false,
    "entity_id": "",
    "lease_duration": 0,
    "renewable": false,
    "mfa_requirement": {
      "mfa_request_id": "d0c9eec7-6921-8cc0-be62-202b289ef163",
      "mfa_constraints": {
        "enforcementConfigUserpass": {
          "any": [
            {
              "type": "totp",
              "id": "820997b3-110e-c251-7e8b-ff4aa428a6e1",
              "uses_passcode": true,
              "name": "sample_mfa_method_name",
            }
          ]
        }
      }
    }
  }
}

Note that the uses_passcode boolean value will always show true for TOTP, and false for Okta and PingID. For Duo method, the value can be configured as part of the method configuration, using the use_passcode parameter. Please see Duo API for details on how to configure the boolean value for Duo.

To validate the MFA restricted login request, the user sends a second request to the validate endpoint including the MFA request ID and MFA payload. MFA payload contains a map of methodIDs and their associated credentials. If the configured MFA methods, such as PingID, Okta, and Duo, do not require a passcode, the associated credentials will be a list with one empty string.

Sample payload

{
  "mfa_request_id": "5879c74a-1418-1948-7be9-97b209d693a7",
  "mfa_payload": {
    "d16fd3c2-50de-0b9b-eed3-0301dadeca10": ["910201"]
  }
}

If an MFA method is configured in a namespace, the MFA method name prefixed with the namespace path can be used in the validation payload.

{
  "mfa_request_id": "5879c74a-1418-1948-7be9-97b209d693a7",
  "mfa_payload": {
    "ns1/sample_mfa_method_name": ["910201"]
  }
}

Sample request

$ curl \
    --header "X-Vault-Token: ..." \
    --request POST \
    --data @payload.json \
    http://127.0.0.1:8200/v1/sys/mfa/validate

Sample CLI request

A user is also able to use the CLI write command to validate the login request.

$ vault write sys/mfa/validate -format=json @payload.json

Interactive CLI for login MFA

Vault supports an interactive way of authenticating to an auth method using CLI only if the login request is subject to a single MFA method validation. In this situation, if the MFA method is configured to use passcodes, after sending a regular login request, the user is prompted to insert the passcode. Upon successful MFA validation, a client token is returned. If the configured MFA methods, such as PingID, Okta, and Duo, do not require a passcode and have out of band mechanisms for verifying the extra factor, the user is notified to check their authenticator application. This alleviates a user from sending the second request separately to validate a login request. To disable the interactive login experience, a user needs to pass in the non-interactive flag to the login request.

$ vault write -non-interactive sys/mfa/validate -format=json @payload.json

To get started with Login MFA, refer to the Login MFA tutorial.

Time-based One-time Password (TOTP)

Enable a Login MFA method to enforce TOTP on the LDAP auth method.

Note

Authenticator applications are not consistent in their support of encryption algorithms. You should research the algorithms supported by your preferred authenticator app. The Configure TOTP MFA Method documentation lists algorithms supported by the Login MFA TOTP method. Google Authenticator supports SHA256.

Configure the Login MFA TOTP method and note down the resulting method_id.

$ vault write identity/mfa/method/totp \
   generate=true \
   issuer=Vault \
   period=30 \
   key_size=30 \
   algorithm=SHA256 \
   digits=6

Using the TOTP method_id and an entity_id from after a sucessful MFA login. Use these to generate a QR code.

$ vault write -field=barcode \
   /identity/mfa/method/totp/admin-generate \
   method_id=$TOTP_METHOD_ID entity_id=$ENTITY_ID \
   | base64 -d > qr-code.png

Create login MFA enforcement

Capture the LDAP auth method accessor for use in creating a Login MFA enforcement.

$ vault auth list -format=json --detailed

Using the accessor from the previous step and a method_id apply the enforcement.

$ VAULT_TOKEN=root vault write /identity/mfa/login-enforcement/adtotp \
    mfa_method_ids=$TOTP_METHOD_ID \
    auth_method_accessors=$ACCESSOR

Successful output example:

Success! Data written to: identity/mfa/login-enforcement/adtotp

Login with LDAP auth method

Logging in with MFA enforcement will resemble the following:

$ vault login -method=ldap username=alice password='password!'
Enter the passphrase for methodID "01194a79-e2d9-c038-029d-79b0091cafd0" of type "totp":

TOTP passcode validation rate limit

Rate limiting of Login MFA paths are enforced by default in Vault 1.10.1 and above. By default, Vault allows for 5 consecutive failed TOTP passcode validation. This value can also be configured by adding max_validation_attempts to the TOTP configuration. If the number of consecutive failed TOTP passcode validation exceeds the configured value, the user needs to wait until a fresh TOTP passcode is available.

Edit this page on GitHub